Yingkou Ruizhi Refractories Co., Ltd.

Yingkou Ruizhi Refractories Co., Ltd. is located in the magnesia city of China, Dashiqiao City, which is very rich in magnesia resource. Ruizhi Refractories is a professional manufacturer of refractory material for high temperature melting furnaces.

Ruizhi Refractories has more than 10 sets of different kinds of brick pressing machines, two of them are 1250 tons friction press and four are 630 tons friction press, and some other types of brick press. Besides, Ruizhi Refractories also has six dry kiln production lines. We are in the leading position for production technology, some of Ruizhi products are advanced internationally. Ruizhi Refractories has a complete set of experimental and testing machines to effectively monitor the whole production process.

Ruizhi Refractories’ main products are: Refractory material for converter, electric arc furnace, ladle, LF furnace, tundish, foundry ladle, torpedo ladle, etc. Shaped refractories like magnesia carbon brick, magnesia-alumina carbon brick, magnesia spinel carbon brick, alumina-magnesia carbon brick, carbon free spinel brick, alumina sic carbon brick, etc.; unshaped refractories like repair material, dry vibration mix, nozzle filling sand, gunning mix, ramming mass for electric arc furnace bottom, etc.

http://www.ruizhirefractory.com/ 

Kiln refractory selection method

refractory material

1, kiln performance and thermal characteristics. Such as intermittent work of the furnace should use refractory brick china low heat capacity of the material.
2, the safe use of materials temperature, thermal conductivity system, high temperature strength, chemical stability.
3, the use of life.
4, investment costs and maintenance costs.
In general, heavy refractory materials are more focused on a certain technical performance indicators, such as high temperature stability, chemical stability, etc .; light insulation materials more pay attention to put into operation and comprehensive technical and economic indicators.
The selection of lightweight insulation materials, the general thermal conductivity is used insulation material (λ) furnace refractory suppliers and the cost per unit volume of insulation material (P) to determine the value of the product of "λΡ" the smaller the better. Thermal conductivity value is small, indicating insulation material insulation effect is good, low energy costs during operation. The low cost per unit volume of refractory China insulation material indicates that the investment cost is low and the investment economy is good. You can use the graph plotting diagram selection, abscissa for the working temperature, ordinate (λΡ) good plot, the material safe use of temperature interception of the curve of the material, select the technical and economic performance of the material.

More refractory:
http://www.ruizhirefractory.com/
Email: sales@ruizhirefractory.com

Insulation refractory materials for aluminum electrolytic furnace and tank construction furnace

refractory materials

Aluminum electrolysis furnace, tank construction furnace insulation refractory materials mainly include the following three:
(A) diatomite thermal insulation material
Diatomaceous earth is the algae organic matter after corruption, the formation of the crustal changes. The main component of diatomite is amorphous silicon dioxide is generally between 70% and 85%) and a small amount of clay impurities, the melting temperature in the range of 1000 ℃ to 1200 ℃. Diatomaceous earth is composed of fine stomatal organization, its porosity up to 85%, so it has good thermal insulation properties, is widely used as a thermal insulation material.
1, diatomite asbestos powder (chicken feather ash), diatomite asbestos powder is a powder insulation material, made of asbestos fibers and diatomaceous earth powder; which accounted for 85% of diatomite powder, fiber 2-5 mm Asbestos accounted for 14%, 5 ~ 20 mm of asbestos accounted for l%, it is used to masonry Insulating refractory brick wiping surface.
2, light diatom brick, light diatomite brick is made of diatomite and additives by molding, drying, at 850 ℃ a 900 ℃ firing. Diatomite refractory brick suppliers bulk density, porosity, heat resistance at 1280 ℃ above, therefore, light diatomite brick can only be used in the insulation below 900 ℃, can not directly contact the flame. In case of high temperature, it will produce shrinkage, or even melt.
(B) asbestos (insulation materials)
Asbestos is the only natural mineral fiber that can be loosened into elastic fibers. According to the different natural conditions at the time of creation, the asbestos and amphibole asbestos can be divided into two categories, the most widely used asbestos asbestos, also known as chrysotile, its chemical formula is 3MgO · 2SiO2 · 2H2O. Asbestos The board is made of 65% asbestos and 35% bonded material and is used primarily as a liner or insulation for equipment. Loss on asbestos board should not exceed 18%, longitudinal tensile strength should not be less than 1.4MPa. Asbestos board structure and thickness must be uniform, smooth surface, consistent cross-section, no scarring, pores and cracks. Asbestos board general specifications for the 1000 × 1000mm (thickness from 1.6 to 16mm), the weight of each 1mm thickness, weighing about 1.3kg / m2. The maximum temperature does not exceed 500 ℃.
(C) Calcium silicate insulation refractory products
Calcium silicate insulation refractory products is a calcium silicate hydrate as the main component of the insulation material. Industry is based on lime, silicic acid as raw material, autoclaved in the autoclave synthetic hydrated calcium silicate, and then appropriate to add asbestos and other fibrous materials, the pressure after the formation of the porous structure of the insulation products. calcium silicate insulation products provides the technical conditions of calcium silicate insulation products.

More refractory material:
http://www.ruizhirefractory.com/
Email: sales@ruizhirefractory.com